70
08/13424999756
Service Port Software
1. General information about Service Port Software
Certain functions can be provided with further parameters via the service port (PC interface) using the appropriate PC
configuration software* and connecting cables*. The functions depend on the PC software version and the firmware of
the SHE panel control system. The service timer can only be Reset via the software.
To alter a configuration via the service port interface the service port connection cable must be connected to the SHE-
control panel type Compact control panel 4A, 4A/M, 8A, 8A/M and the PC. Before configuration, both the Service Port
Software and also, where relevant, any further drive files for the connection cable must be installed and working. See re-
levant software installation instructions. The SHE control panel should be connected to mains voltage during configurati-
on. From version 01.04.00 onwards the control panel type Compact control panel 4A, 4A/M, 8A, 8A/M can be configured
via the Service Port Software. Updates to the Service Port Software can be downloaded from www.STG-BEIKIRCH.de.
After starting the Service Port Software and clicking the
"
Search
“ button, the configuration screen is automatically
launched.
The existing configuration of the compact control panel can
be read by clicking the “
Read
” button. The “
Write
” button
can be used to transfer the amended parameters and
configuration data.
In the tooltips "
Info
" and "
DIP swiches info
"
the current configuration of the DIP switch
settings and information about the smoke control unit such
as the serial number or the software version are displayed.
Here is no parameterization or functional change possible.
* supplied with the Service Port Software package.
Compact control panel 4A, 4A/M und 8A, 8A/M
