63
08/13424999756
wind-rain detector
WRM/2 or RM/2
Connecting control panel Slave (Cascade function)
(Rev019 hardware version, software version V020001, see marking on the board)
All work to be carried out without mains supply (230 V AC) or any batteries connected. Route the connecting cables
into the control panel housing at the top. Connect all connecting cables according to the wiring diagram and make sure
that they are correctly connected. Incorrected connections or figure or colour mix-ups can lead to incorrect function of
the control panel or of the external components. The notes and installation directives in the technical documentation are
always to be observed.
3.
Connecting forwarding "wind/rain message" to Slave-Control panel
Note:
For the forwarding of wind-rain message to other centers
requires no special settings via DIP switch
23 24 25 26
S
1
Ö
2
A
3 4
5
6
+ -
WS
WS
23 24
+ -
23 24
33 34 35
A
Ö
S
33 35
33 35
33 35
Compact control panel 4A, 4A/M und 8A, 8A/M
Master-Control
panel
last Slave-Control
panel
Slave-Control
panel
Setting the DIP switches for the
Rain detectors RM/2 and wind-rain detector
WRM/2, see page 67
