34
Insert the DC jack into the top of the housing making
sure the longer of the two lugs is on the left. Using a
14mm wrench or needle nose pliers and 14mm nut,
secure jack into housing just enough to allow the jack
to rotate.
Solder the inside left wire to the longer lug of the
DC jack.
Solder the inside right wire to the shorter lug of the
DC jack.
Once solder joints have cooled, tighten the nut with a
pair of needle nose pliers. Be careful not to tighten to
tightly because you can crack the bushing of the jack.
WD 19-1
WD 19-2
INSTALL THE
DC JACK
FOR MODEL
12251
(DC only)
19
19
