5
PRE-INSTALLATION INFO
Check contents
Separate all parts from the packaging and check each part with the pack
contents section. Pay attention to the variations of the different models.
Make sure all parts are accounted for before discarding any packaging
material.
If any parts are missing, do not attempt to install your electronic faucet
until you obtain the missing parts.
Preparation for installation
Flush water supply lines thoroughly before installing the faucet. Do not
allow dirt, Teflon tape or metal particles to enter the faucet. Shut off
water supply.
Important
All plumbing is to be installed in accordance with applicable codes and
regulations.
Warning
To avoid reflection problems keep a distance of more than 300 mm.
between the sink and the spout.
1. Keep a distance of more
than 300 mm. between the
sink and the spout.
To avoid reflection problems
2. Do not place a shiny
pop up in front of the
sensor.
