14
SETTINGS ADJUSTMENT
TEMPORARY OFF FUNCTION:
This function is ideal to perform any
kind of activity in front of the sensor without operating the system (for
example, cleaning).
The faucet will remain shut for 1 minute when this button is pressed
once. To cancel this function and to return to normal operation press
the On/Off button again or wait 1 minute.
RESET BUTTON:
This function restores all the factory settings except
for the sensor range. If required, press the Reset button and without
releasing it, press the + button once.
Note:
To enter the self adjusting mode, use the ADJ button. To change the sensor
range, use the RANGE button.
24 HOUR HYGIENE FLUSH:
If you have a compatible model with a 24
hours hygiene flush it is possible to enable and disable it .
To activate the hygiene flush, press the clock button. Wait until a
quick flashing of the red light of the sensor eye is perceived. Then
press + to activate the hygiene flush or – to deactivate it.
DELAY OUT TIME:
This button allows modifying the water flow time
after the user removes his hands from the faucet. A delay out time
close to 0 will save more water. An increased delay out time will make
the user experience more comfortable.
If required, the delay out time can be modified as follows:
Press the OUT button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the delay out time
and – to reduce it.
DELAY IN TIME:
It is recommended to change the delay in time for
flush valves for urinals or toilets only.
If required, the delay in time can also be modified in faucets as follows:
Press the IN button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the delay in time
and – to reduce it.
