7
FAUCET INSTALLATION
D28
Before proceeding to step 3 check that
no objects are in front of the sensor
besides the washbasin.
Now, remove the protecting sticker that
covers the sensor.
Step 3 – Connecting the power source
1. For D28 B: Connect the other cable coming from the electronic unit at the D28
base to the battery box.
2. For D28 E: Connect the other cable coming from the electronic unit at the D28
base to the transformer. Plug the transformer into the electricity socket.
3. After you have connected the power source
(Battery or Transformer) wait 15 seconds in order
to allow the system to set the ideal sensor range.
As an indication that the self adjusting is taking
place, a red light in the sensor eye will flash
continuously.
The solenoid valve will be opened
and closed for 1 second as an indication that the
ideal sensor range was set and the product is
ready for use.
4. Turn on the central water supply. Check for
leaks.
5. If the automatically adjusted sensor range is
not satisfactory, please refer to the section entitled “Settings adjustment”.
