15
Display Over/Setpoint 2 Value:
1) Press the SHIFT key and then the 3|SP 2 key to display the
upper comparator or setpoint 2 value.
GENERAL OPERATION
Zero the scale:
1) Press the ZERO key. Any weight on the scale is subtracted
and the scale will display zero.
Display gross weight:
1) While in the COUNT mode, press the SHIFT key and then the
5|GROSS key to temporarily display the gross weight.
2) While in the COUNT mode, press the RESET key to return the
scale to the weight mode.
3) While in the weight mode, press the SHIFT key and then the
5|GROSS key to switch to the gross weight mode.
Display net weight:
1) While in the COUNT mode, press the SHIFT key and then the
6|NET key to temporarily display the net weight.
2) While in the COUNT mode, press the RESET key to return the
scale to the weight mode.
3) While in the weight mode, press the SHIFT key and then the
6|NET key to switch to the net weight mode.
Display count:
1) While in the weight mode, press the APW key.
2) The APW of the last part counted is recalled. The scale
switches to COUNT mode and displays the piece count.
Sample guide:
1) Count parts using any method.
2) Press the SHIFT key and then press the 2|F1 key to display
the Percent accuracy for the sample used.
3) Re-sample with more parts if the percent accuracy is too
low.
Sample Enhancement:
1) Count parts using any method.
2) Use the sample guide to check the percent accuracy.
3) If low, add 100 % more parts to the scale and press the
COUNT key to activate sample enhancement.
4) Repeat steps 2 and 3 until the percent accuracy is high
enough.
Print data
:
1) Press the PRINT key to output data in the format set in
parameters.
