Steris InnoWave PCF Sonic Irrigator Operator'S Manual Download Page 102

Page: 102 / 168

Use the number pad on display to confirm the
new 6-digit supervisor PIN.

If the new supervisor PIN entered the first and
second time do not match, the supervisor PIN
will not be changed and you must try again.

If the new supervisor PIN entered the first and
second time match, the supervisor PIN is
changed and the display will return to

Enter

New Pin

8.4

Viewing and Editing Wash Program Parameters

Within the supervisor menu, wash program parameters can be viewed. If a wash
program is unlocked, the program parameters can also be adjusted using the
display. Locked wash programs can only be viewed and not adjusted.

If a wash program is unlocked, the text at the bottom of the display will read

Edit Program #

. If a wash program is locked, a padlock symbol

is shown and

the text at the bottom of the display will read

View Program #

THE SUPERVISOR MENU

InnoWave PCF Sonic Irrigator

Operator Manual

Summary of Contents for InnoWave PCF Sonic Irrigator









































































































































































Search results

Summary of Contents for InnoWave PCF Sonic Irrigator

Reviews:

Brands by name

Popular brands

Steris InnoWave PCF Sonic Irrigator, Operator'S Manual

Search results

Summary of Contents for InnoWave PCF Sonic Irrigator

Reviews:

Brands by name

Popular brands