Steris AMSCO 30 Series, Operator'S Manual

Page: 12 / 38

ii
11002980_C
Reprocessing Sink Operator Manual
If gap is too large, the tail piece will bottom out as sink is lowered, causing damage. If gap is
too small, the tail piece will leak when sink is fully raised.
Unplug unit when cleaning lifting columns or cleaning near controller.
Causing unit to overheat too many times greatly reduces life of unit and could damage unit,
making it inoperable, requiring replacement.
Use non-abrasive polish to clean the sink. Rub in a back and forth motion in the same direction
of surface grain. Only wipe down sink. DO NOT use a sprayer to wash and/or rinse sink.