StepUp computing DocuNote, User Manual

Page: 51 / 61

User’s Manual
www.docunote.com 43
Setting up System Password
This will set up the password to your DocuNote in BIOS level. It will
ask you the password each time you turn on your DocuNote. Once it
is set, DocuNote will not start booting without a correct password.
NOTE
It is important to memorize the password you entered. If you cannot
remember your password, DocuNote has to be reset at a hardware
level by your authorized reseller. Therefore, use the system password
feature discretely and keep your password in a safe place.
To set or remove the system password:
1. Go to the CMOS Setup screen by pressing <F2> key once the
booting screen is on
2. Move to Security tab and select Supervisor Password tab in the
menu
3. Type your password and press Enter
4. Type the same password one more time for confirmation, and
then press Enter
5. When the message states that the password is saved, press Enter
6. Set the Password on Boot of the Security menu to Enable
7. Press <F10> to save your change and exit and DocuNote will
reboot with new settings