StepUp computing DocuNote, User Manual

Page: 24 / 61

User’s Manual
16
Understanding Your DocuNote
Installing the Battery
In some cases you may need to install the battery or replace an old
battery with a new one. To install the battery, place the DocuNote’s
display on a flat surface. It is recommended that you place a soft
cloth underneath to prevent scratches on the display. Please follow
the below steps to insert or change the battery.
NOTE
You may skip this section if the battery pack is already installed in
your DocuNote.
To install the battery :
1. Power off your DocuNote
2. Place the DocuNote unit facedown on a level surface, locate the
two screws on the back panel that secure the battery compartment
and unscrew them
3. Disconnect the battery connector from the main unit if you are
replacing the battery
4. Insert the battery into the battery compartment and attach the
battery connector to the main unit
5. Secure battery compartment with the two screws previously
removed
Managing the Battery
If the battery is continuously charged and discharged over a period of
time, its total capacity will be shortened. When the battery power
lasts only half as long, it is time to replace it with a new one. Please
consult the authorized reseller regarding the purchase a new battery or
additional batteries.
An occasional full discharge of the battery prior to charging can help
keep its peak performance. Power management features in Windows