SSDK12M - SSDK16M - SSDK20M
19
Fig.15 (above) shows the page order when pressing the navigation button.
A red LED light will be illuminated above the button.
The generator is now ready to receive start/stop requests from the remote connections.
Waiting in AUTO MODE
While the DSE 3110 module is in
AUTO MODE
the LCD screen will be permanently illuminated and it will
not
go into any power saving or sleep modes.
If the module is left in
AUTO MODE
for extended long periods of time without running the generator it could
flatten the generator battery.
AUTO MODE - Start/Stop Operation
It is possible to scroll to display the different pages of information by repeatedly operating the navigation
button.
Once selected the page will remain on the LCD display until the user selects a different page or after an
extended period of inactivity, the module will revert to the status display.
When scrolling manually, the display will automatically return to the Status page if no buttons are pressed for
the duration of the LCD Page Timer.
It is advised to have a mains 12V battery charger fitted to the generator battery in most cases of occasional
use fixed positioned generators or ensure the generator is started and allowed to continuously run for a
minimum of 1 hour once a week.
Viewing the Instruments
External Fuel Source
As a standard feature the K-Range model generators come fitted with fuel (3-way) valves to manually switch
between the generators own internal fuel tank and an external fuel source.
There are two valves, one is to FEED the engine fuel. The other valve is a RETURN, for fuel returning from the
engine back to the fuel source.
Both valves connections can be found on the outside of the main generator canopy next to the fuel filler -
Fig.16. Yellow labels indicate the valve identity, FEED or RETURN. Another yellow label shows the valve
operation.
Both valves must be used in the same position, either in LOCAL (generator fuel tank) or REMOTE (external
fuel source).
3-Way Valve(s)
Activate auto mode by pressing the button. The icon will be displayed on the LCD screen to
indicate the DSE 3110 module is in
AUTO MODE
if no alarms are present.
