Stenograph WAVE User Manual Download Page 64

Page: 64 / 82

Wave User Guide

Install Wave Drivers

1. Turn your computer

. Ensure it is fully booted.

2. The Wave USB device drivers are available for download from the Stenograph website at

www.stenograph.com

. At the Stenograph website: click Support, Download Center and Utilities &

links.

3. Right click the on the

Stenograph Writer USB Drivers

and select

Save Target as

Save Link as

and save the file to a location on computer desktop or your hard drive.

4. Navigate to the location where you saved the file, highlight the file, right click and select

Extract All

Then double click the

StenographDriverInstall.exe

to install the drivers.

The Windows Security screen may display, prompting you to install the Stenograph L.L.C. Ports
(COM & LPT) virtual serial driver. Click the option,

Always trust software from “Stenograph”

and

then click

Install

. If a second prompt displays for the Stenograph USB Writer driver, click

Install

5. The Wave driver installation begins.

6. Once the drivers install, the Stenograph Writer Drivers Setup Complete dialog box displays. Press

Enter

(Finish) to close the wizard.

Confirm Device Drivers Installation

Confirm both the Stenograph Ports (COM & LPT) virtual serial driver and the Stenograph USB Writer
driver installed successfully using the Windows Device Manager.

To verify the security device drivers installed correctly:

1. Ensure the Wave is turned

and connected to the computer via USB cable.

2. From the Windows Start menu, click

Control Panel

3. If the Permissions dialog box displays, select

Continue

. Select Device Manager.

4. In the Device Manager, click the plus sign next to

Ports (COM & LPT)

. Verify

Stenograph Writer

Serial Port

displays in the list:

If your Wave USB Communication option is set to

Mira Emulation

, no device driver line displays.

5. Click the plus sign next to

Stenograph USB Writer

. Verify

Steno Machine

displays in the list:

If your Wave USB Communication option is set to

Mira Emulation

, the Device Manager displays

Stenograph élan Mira A3

in the list:

Summary of Contents for WAVE



















































































Search results

Summary of Contents for WAVE

Reviews:

Related manuals for WAVE

Brands by name

Popular brands

Stenograph WAVE, User Manual

Search results

Summary of Contents for WAVE

Reviews:

Related manuals for WAVE

Brands by name

Popular brands