Stenograph WAVE User Manual Download Page 21

Page: 21 / 82

Chapter 3: Wave Hardware Features

Battery Gauge

The battery gauge on the title bar of the Tilting screen provides a general indicator of the main battery
voltage level. It changes appearance as the voltage level of the battery changes:

•

—

an electrical plug with a full green gauge indicates the Wave is plugged into the AC adapter/

charger and the main battery is fully charged.

•

—

a battery with a full green gauge indicates the main battery is fully charged. As the charge of

the battery level drops, the green bar becomes smaller.

•

—

a battery with a partial yellow gauge indicates the battery is low.

•

—

a battery with a short red gauge indicates the battery is almost completely drained. The

battery icon flashes on and off.

•

—

a battery with black and yellow running stripes indicates the Wave is plugged into the AC

adapter/charger and the batteries are charging.

Tilting Screen Battery Messages

The Tilting screen displays four progressive warning messages as the main battery level becomes low
and requires recharging:

•

Main battery, Danger -- Battery Low.

•

Main Battery, Danger -- Recharge Battery Now.

•

Main Battery, Battery Dead -- Switching To FailSafe...

•

Main Battery, Battery Dead -- Recharge Battery Now!

If the Wave is connected to a computer with a USB cable, low battery messages display but all the
features continue to operate. See

Powering With the USB Cable

on page 23.

Summary of Contents for WAVE



















































































Search results

Summary of Contents for WAVE

Reviews:

Related manuals for WAVE

Brands by name

Popular brands

Stenograph WAVE, User Manual

Search results

Summary of Contents for WAVE

Reviews:

Related manuals for WAVE

Brands by name

Popular brands