12
S10P Series www.stenner.com
TIME MODES
PUMP RUN HOURS
The total hours the pump has run displays on the pump run hours screen. The pump run
hours cannot be reset.
TUBE RUN HOURS
The total hours the tube has been in service displays on the tube run hours screen.
NOTE: In Flow Switch and Auxiliary modes, the pump must be off at least once per
hour for the tube hours to accumulate properly.
TUBE CHANGE HOURS
On the tube change hours screen, set the number of hours desired for the tube to run
before a tube replacement. When the tube run hours exceeds the set hours, the CHANGE
indicator flashes. The setting is 0 to 2550 in 10-hour increments.
RESET TUBE HOURS
After the tube is replaced, go to the reset tube hours screen and select yes to reset the
tube run hours to zero. If the CHANGE indicator is flashing this step will clear the display.
