STEMME S6-RT, Flight Manual

Page: 177 / 236

7 6 Revision:
Date of Issue: 18. November 2011 Date of Rev.: . .
3 4 0 ! "
Design: CFC Sandwich
Mounting: Rudder mounted on top and bottom, 1 control connector on
bottom
Operation: The rudder movement is transmitted in the front section and
midsection of the fuselage by control cables. In the rear section
this changes to control rods.
The rudder is operated by the rudder pedals. When on the
ground with landing gear extended, the nose wheel steering is
also connected to the rudder pedals. The steerable nose wheel
is operated by control cables.
!
Design: CFC Sandwich
Mounting: 6 joints and 1 control connector each
Operation: Operated with push rods, flap deflection is effective across
whole wing span (inner wing and outer wing)
The flaps are set by using the flap lever with detents. Setting
indicator is located near the flap lever.
The flap deflection is overlaid over the aileron deflection at the outer wing.
Unlock the flap lever by pushing it to the right. It automatically detents through
the use of a spring.
Possible flap settings:
Cruise Flight (CRUISE): 4.0°
Neutral (NEUTRAL): + 5°
T/O / Landing (TO / LDG 1): + 18.5°
Landing (LDG 2): + 25°