STEMME S12 Maintenance Manual Download Page 118

Page: 118 / 290

DOCUMENT NUMBER:

L500-912.820 ISSUE JUL 20, 2016

AMENDMENT: 00

DATE: --

CHAPTER-

PAGE 5-16

MAINTENANCE MANUAL STEMME S12

• Filters and Screens:

Filters and screens shall be removed, cleaned, and inspected for contamination and

shall be replaced as appropriate or required.

Fuel filters encased in metal should be replaced at the recommended intervals.

• Wet Fuel Areas:

Cleanliness,

leaks,

bacterial growth,

corrosion,

delamination,

separation of bond,

deterioration of fuel tank lining,

and structural fatigue

• Fire Sleeves:

dents,

kinks, tears,

loss of flexibility,

deterioration,

obstruction,

chafing,

improper bend radius,

cleanliness,

securely installed,

open ends, and

any other apparent damage.

OPERATIONAL INSPECTION

When called for in conjunction with an inspection task, an “Operational Inspection” is a check to

determine that a component or system is fulfilling its intended purpose. The operational inspection

does not require quantitative tolerances.

FUNCTIONAL INSPECTION

When called for in conjunction with an inspection task, a “Functional Inspection” is a quantitative

check to determine if one or more functions of a component performs within specified limits.

The functional inspection is a comparative examination of a component or a system against a

specified standard.

Summary of Contents for S12



































































































































































































































































































Search results

Summary of Contents for S12

Reviews:

Related manuals for S12

Brands by name

Popular brands

STEMME S12, Maintenance Manual

Search results

Summary of Contents for S12

Reviews:

Related manuals for S12

Brands by name

Popular brands