5
INSSTE402P0711
Out of any adjustment mode, press down the
+ button to increase the set point, or the - button
to decrease it. Set points can only be adjusted by
increments of 0.5 degree. To quickly scroll through
the set point values, press and hold down the but-
ton. The minimum set point is 3°C (37°F), and the
maximum set point is 30°C (86°F).
Adjustment of the hour and the day of the week
Adjustment procedure of the hour and the day of
the week:
1. Press down the Jr/Day/Hr button, whether it is
from Man, Auto or Pre Prog mode;
2. At this moment, the icon and the day of the
week start to blink and you can adjust the day of
the week using the + or - button and confirm your
choice by pressing down the Mode or the Jr/Day/
Hr button. You can also press down the day of the
week button desired without using the + or - but-
ton and confirm your choice using the Mode or
Jr/Day/Hr button;
3. The two figures indicating the hour blink. You
must adjust them using the + or - button and
confirm your choice by pressing down the Mode
or Jr/Day/Hr button;
4.
The two figures indicating the minutes blink.
You must adjust them using the + or - button
and confirm your choice by pressing down the
Mode or Jr/Day/Hr button. The adjustment is
then completed and the thermostat returns to
the previous mode.
At any time, you can exit the adjustment mode
of the day and the hour using one of these 2
methods.
1- Press down the Sortie/Exit button.
2- Press and hold down the Mode button.
3- Do not press down any button during 1 minute.
The adjustment of the hour and the day of the
week can be done from any of the three modes.
In case of a power failure, the thermostat is self-
sufficient for 2 hours. If the failure lasts less than
2 hours, the thermostat saves the adjustment of
the hour and the day of the week. When the power
is restored after an extensive failure, the hour and
the day of the week are recovered, but you must
update them.
Display in degrees Celsius/Fahrenheit
The thermostat can display the ambient tempera-
ture and the set point in degrees Celsius (standard
factory setting) or Fahrenheit.
Adjustment procedure for degree Celsius/Fahren-
heit display
1. To switch from the degrees Celsius to the de-
grees Fahrenheit, and conversely, simultane-
ously press down the + and - buttons for more
than 3 seconds until the icon starts to blink;
2. Press down the + button to switch from the de-
grees Celsius to the degrees Fahrenheit, and
conversely. The degree Celsius or Fahrenheit
symbol will be displayed;
3. When the adjustment is completed, press down
the Sortie/Exit button, hold down the Mode but-
ton or do not press down any button during 1
minute to exit the adjustment function.
Note:
This adjustment can be done from any of the
three principal modes. From the adjustment mode,
the figures displayed at the top of the screen are
only useful for the manufacturer. It is not the ambi-
ent temperature.
Manual mode (Man)
From the Manual mode, you can manually adjust
the thermostat set point by pressing down the +
or - button to increase the value, or to decrease
