Page 49
16400-7820 GIDOD REV A
1. Turn off the fireplace at switch.
2. Turn off all electrical power to fireplace.
3. Wait five (5) minutes to allow any gas that may have accumulated
inside firebox to escape. If you then smell gas, STOP! Follow safety
information on front cover and on previous page of the installation
manual. If you don't smell gas, go to next step.
4. Turn ON all electrical power to fireplace.
5. Turn fireplace on at switch.
OFF
2
ON
5
Figure 12B
12 - LIGHTING & SHUTDOWN
STOP! Read safety information on previous page and front cover of this manual before continuing.
NOTE: This fireplace is equipped with an ignition device which automatically lights the pilot.
DO NOT try to light the pilot by hand.
CAUTION: If fireplace will not operate, follow instructions TURNING OFF GAS TO FIREPLACE and call your service technician
or the gas supplier.
NOTE: When fireplace is initially lit, condensation may appear on the glass; this is normal in all gas fireplaces and will
disappear after several minutes.
B. IF THE FIREPLACE DOES NOT LIGHT
Summary of Contents for 3-IDOD-2-GL
Page 32: ...INS_CUST UL REV E Page 32...
