Page 17
16400-7820 GIDOD REV A
COMBUSTIBLE HEARTH
COMBUSTIBLE FACING
MATERIAL
SIDE GLASS FRAME
- DO NOT COVER -
COMBUSTIBLE OR NON-COMBUSTIBLE
BACKING MATERIAL (I.E. SHEETROCK)
COMBUSTIBLE OR
NON-COMBUSTIBLE MATERIAL
1/2” [12.7 mm]
STANDOFFS
6” [152mm]
6” [152 mm]
MINIMUM NON-COMBUSTIBLE ZONE
MINERAL WOOL ONLY IN THIS SPACE
8”
COMBUSTIBLE FRAMING
BOTTOM GLASS FRAME
DO NOT COVER
3” [76.2mm]
THIS EXAMPLE OF FRAMING AND FINISHING IS FOR REFERENCE.
PLEASE MAKE SURE TO MAKE CONSIDERATIONS FOR THE FRAMING AND FINISHING
MATERIALS THAT YOU ARE USING FOR YOUR PARTICULAR INSTALLATION.
GLASS VIEWING AREA
COMBUSTIBLE MANTEL
TOP OF FIREPLACE
1/2” [12.7] CLEARANCE TO
COMBUSTIBLES ON HOOD SURFACE
The fireplace ships with standoffs in place
to ensure a 1/2” clearance to combustibles
is maintained on the surface.
3” [76.2mm]
THE 3” [76.2] STEEL SURFACE AROUND
THE FIREPLACE OPENING CAN NOT BE
COVERED WITH ANY MATERIAL.
GLASS AND DECORATIVE FRAMING WILL
BE PLACED ON TOP OF IT.
EXTERIOR
TOP GLASS FRAME
DO NOT COVER
INTERIOR SHOWN.MANTEL AND FRAMING EXAMPLE
APPLIES TO BOTH SIDES FOR SEE THROUGH FIREPLACE.
COMBUSTIBLE HEARTH ON
EXTERIOR NEEDS TO BE PLACED
UNDERNEATH AIR INTAKE VENTS
AIR INTAKE VENTS
Important Note: Exterior Hearth
You must properly flash and slope the hearth so water drains away from the wall.
EXTERIOR FLANGE
Figure 5.1
5 - FRAMING & MANTEL REQUIREMENTS
5.1 NON-COMBUSTIBLE ZONE - USING THE PROVIDED 1/2" STANDOFFS
Summary of Contents for 3-IDOD-2-GL
Page 32: ...INS_CUST UL REV E Page 32...
