7
Power On
To power the Cinder “On”:
1.
The power button is located on the
rear right of the thermal sight,
marked with this symbol.
2.
Press and hold for 3 seconds and
look into the eyepiece to see the
display light up. The Steiner logo
will appear, followed by thermal
imagery after a short boot-up.
3.
Once powered on, adjust the
eyepiece diopter ring to bring the
display into focus.
4.
The system will boot up in “camera”
mode. Focus the objective lens to
bring the scene to a sharp image.
Controls
Cinder is controlled using a 5-button
keypad, with up/down/left/right/select
functions.
The Control Pane at the bottom of the
display indicates keypad function for each
screen. These functions change depending
upon what screen you’re in. After a brief
time on each screen, the control pane will
disappear.
Press and hold
for 3 seconds
Adjust diopter
to ensure
3
1
2
Adjust focus to
ensure scene
Menu
/Select
Summary of Contents for CINDER 9501
Page 1: ......
