20
The distance to the target is
recalculated automatically when
you move the upper bar to the
target on the display.
4.
Selecting the button will allow
you to alter the custom target size
by entering a sub-menu. Press e
button to exit that sub-menu.
5.
If GPS has been enabled and the
Cinder has achieved good GPS lock,
a Waypoint can be created to the
target that was just ranged. This
waypoint takes into account the
orientation of the Cinder (ie uphill /
downhill), the compass direction
the Cinder is pointed in, and the
range to the target. Press to
create and name your waypoint.
You can then navigate to that
waypoint using the
GPS Waypoints
menu.
GPS Waypoints
Cinder features navigation to a set point via
GPS.
Turning On / Off GPS
1.
On the camera screen, click on
Menu
and then select
GPS
Waypoints
.
2.
Ensure that
GPS
is turned on via the
Enable/Disable GPS
Menu
and has a 3D location fix. During the
first time the Cinder GPS is turned
on in a new location, it may take up
to 15 minutes to locate sufficient
satellites for a 3D fix. Subsequent
uses in the same location should
If using the Cinder App, then
waypoints generated in this
manner will also be navigable
using Google Maps.
Ensure that the compass
is calibrated before using
the waypoint feature.
Compass calibration can
be done by following the
steps mentioned in the
Calibrating Compass
section.
Note:
Warning:
Summary of Contents for CINDER 9501
Page 1: ......
