STEIN300_Umsetzer_04_GB.doc / 03.2020
11
For the 90° transfer unit the permitted loading is
•
in the Z axis: 12 N (WT + workpiece) if load is centred and under a STEIN working
pressure of 4 bar.
For the 180° transfer unit K the permitted loading is
•
in the Z axis: 12 N (WT + workpiece) if load is centred and under a STEIN working
pressure of 4 bar.
Unauthorised interventions, alterations or repairs carried out to the transfer units invali-
date the guarantee.
STEIN Automation accepts no liability for any damage caused by unauthorised interven-
tions, alterations or repairs.
3.3
Foreseeable misuse
DANGER
It is prohibited
to transport products or workpieces with the transfer unit other than those ap-
proved.
to transport parts without workpiece carriers
This can lead to unforeseeable operating conditions and related dangers.
The transfer units must not be used
•
in queue mode.
•
be used to stop workpiece carriers,
•
be used to separate workpiece carriers
i
STEIN Automation accepts no liability for damages that might arise due to misuse of
the system.
3.4
Residual danger
DANGER
The transfer unit must be integrated in the EMERGENCY STOP circuit of the high-
er level
system controller.
The transfer units are manufactured using state-of-the-art technology and to recognised
safety standards. Nevertheless their use can lead to dangerous situations for users or
third parties or to impairments of the system and other material assets
.
