STEIN300_Umsetzer_04_GB.doc / 03.2020
15
Fig. 4-1:
Sample
Basic configurations:
1
A-basic configuration
with 90° transfer unit
2
B-basic configuration
with 180° transfer
unit
A-basic configurations
are equipped with 90° transfer units
.
B-basic configurations
are equipped with 180° transfer units.
Transfer unit 90°
The 90° transfer unit puts the WT from the main section onto the transverse section or
from the transverse section onto the main section. The 90° transfer unit is fitted
between the guide profiles of the conveyor
.
Transfer unit 180
o
The transfer unit 180° moves the workpiece carrier to a section that runs parallel to the
original direction of transport.
Procedure:
The WT is transported by the two transport belts until it reaches the inlet stopping device
(STEIN Automation option) or the internal stop (standard). The proximity switch located in
this position activates the elevating cylinder and the workpiece carrier is lifted up. in the
last step the WT is transferred to the transverse section
.
WARNING
The transfer unit may only be operated with or while enclosed by protective
guards.
1
2
