shock sensor will send the signal to the control unit, and the control unit will arm the system by itself.
8. Auto hint and auto arm function (optional)
After parking the car with the door closed, but the alarm is not armed. The control unit will send signal to the
siren to submit three beeps to hint the driver to arm the system. (Factory setting)
If the alarm system is not armed in 1 minute, the control unit will send the signal to central locking system to lock
the doors and arm the system automatically. (This function is optional, it should be chosen in the control board
of control box by technician before the system is installed).
9. Trunk opening with remote
When the car is in parked status, press at the same time, the control unit will send signal to the wire
connect the trunk of the car. Then the trunk will be opened.
10. Call the driver
In armed status, knock the windshield, the shock sensor will be triggered and send signal to the control unit. The
control unit will transfer the call signal to the emitter and the emitter will transfer the call signal to the remote.
The remote will beep to tell the driver that someone is looking for you.
11. Auto lock/unlock the door
When the foot brake is pressed after the car set out 15 seconds later, the main unit received the signal from the
foot brake and sent signal to central locking system. Then doors will be locked. When the car stopped and the
ACC is on off position, the control unit will receive the signal from the ACC, and send signal to central locking
system, the doors will be unlocked
In driving status, press button
to lock the doors, press button
to unlock the doors.
14. Status preserving