When the power wire is cut off, the control unit will preserve the status and when the power is supplied the
system will return to the former status in 5 seconds.
15. Indicating to lock the doors
When the system is armed, if the doors are not locked properly, the main unit will received the signal from the
central lock and send signal to the siren and direction lights. They’ll flash and beep 3 times. If the driver still not
notes this in 10 seconds, the siren will chirp sharply. The driver needs to disarm the alarm system, lock the
doors properly and arm the alarm again.
16. Warning for roadside stop
When stopping by the road with the door opened, the main unit will send signal to the direction lights to flashing
and warning the approaching vehicles.
17. Locating the vehicle in parking lot with sound and flash
To press
at the same time, the main unit will sent the alarm signal to the siren and direction lights.
Then the siren will alarm and direction lights will flash for 30 seconds to locate the vehicle.
18. Emergency aid
In driving status, press
at the same time, the main unit will sent the alarm signal to the siren and
direction lights to ask for help. The siren will chirp for 30 seconds and the direction lights will flash, press any
button on remote will stop chirping.
19. LED light warning
According to the impacted status of the car, the main unit will control the LED light to flash in different frequency.
21. Override reset switch
In the event the remote transmitter is lost or inoperative, the system can be disarmed by override reset switch:
