Page 3 of 14
939500540 Rev F
4.
Use existing clearance holes in desk frame sides for
drilling location. Drill two (2) holes through side of desk
frame assembly and into cabinet.
NOTE:
Use masking tape to prevent any possible chipping
while drilling and backup with clamped wood block.
5.
Secure desk frame assembly to base cabinet using
two (2) 1-1/2" connector bolts. Repeat steps 4 and 5 for other
end of desk frame assembly.
6.
If desk frame is 60", 66" or 72" wide, install reinforcement
channel underneath worksurface toward the front.
Secure using eight (8) 1/2" wood screws.
7.
Re-install drawers in the base cabinets.
6
5
4x
4
FOR 60", 66" & 72" WIDTHS ONLY
1/2" WOOD
SCREW
REINFORCEMENT
CHANNEL
WORKSURFACE
1-1/2" CONNECTOR
BOLT
WOOD BLOCK
MASKING TAPE
Clamp a wood block on
other side of panel to
prevent excessive
blowout.
Use a sharp 3/8" drill bit
to drill holes through.
