Page 13 of 14
939500540 Rev F
NOTE:
Before installing brackets onto V.I.A.- Using an
X’acto knife, cut slots in the seal using the furniture
slots as guides.
CUT SLOTS
SKIN
SKIN
4b
NOTE:
Use the LH and RH brackets in the proper
orientation.
4.
Install brackets and desk frame by inserting the top
hook into slot from step 3 (4a), then rotate the remaining
hooks into slots and slide down (4b). Make sure the top
and back of the units are flush.
NOTE:
The desk frame is a different height than
the cabinets it's attached to because there's no
base. Make sure tops are properly aligned
4a
(RH BRACKET SHOWN)
