4
3
4
Page 7 of 14
939500540 Rev F
3.
Use existing clearance holes in desk frame sides for drilling
locations. Drill four (4) 3/8" diameter holes through side of desk
frame assembly and into cabinet.
NOTE:
Use masking tape to prevent any possible chipping while
drilling and backup with clamped wood block.
4.
Secure desk frame assembly to base cabinet using four (4)
1-1/2" connector bolts. Repeat steps 3 & 4 for other side of desk
frame assembly.
5.
Re-install drawers in the base cabinets in their original
positions.
WOOD BLOCK
MASKING TAPE
1-1/2" CONNECTOR
BOLT
Clamp a wood block on
other side of panel to
prevent excessive
blowout.
Use a sharp 3/8" drill bit
to drill holes through.
