Page 5 of 14
939500540 Rev F
4.
Secure end panel to desk frame with two (2) 5/16-18 x 1-1/4" bolts (4a).
Use existing clearance holes in desk frame sides for drilling location (4b).
NOTE:
Use masking tape to prevent any possible chipping while drilling and
backup with clamped wood block.
5.
Secure desk frame assembly to base cabinet using two (2)
1-1/2" connector bolts.
6.
Position desk frame bracket centered (top to bottom) on end panel (6a).
Secure to wall using appropriate wall anchors and three (3) screws.
Secure to end panel with three (3) 1/2" wood screws (6b).
7.
If desk frame is 60", 66" or 72" wide, install
reinforcement channel underneath worksurface
toward the front. Secure using eight (8) 1/2"
wood screws.
8.
Re-install drawers in the base cabinet.
FOR 60", 66" & 72" WIDTHS ONLY
1/2" WOOD
SCREW
REINFORCEMENT
CHANNEL
WORKSURFACE
WOOD BLOCK
5
7
4x
6a
6b
4a
4b
5/16-18 x 1-1/4"
BOLT
DESK FRAME
BRACKET
1-1/2" CONNECTOR
BOLT
Clamp a wood block on
other side of panel to
prevent excessive
blowout.
Use a sharp 3/8" drill bit
to drill holes through.
MASKING TAPE
