Page 11 of 14
939500540 Rev F
Installing End Panel onto V.I.A. - On-Module
8”
9.
Locate slot in vertical post closest to 8” from the floor.
10.
Install bracket by inserting the top hook into slot,
from step 9, then rotate remaining hooks into slots and
slide down.
11.
Secure end panel to bracket using two (2) 1/2”
tapping screws.
14.
End panel glides should be adjusted to ensure all
glides are touching the floor.
1/2”
TAPPING
SCREWS
TOP HOOK
GLIDES
8.
Secure end panel to desk frame using two (2) 5/16-18
x 1-1/4” fasteners.
12.
Secure work surface bracket to desk frame side
rail using two (2) 5/8” tapping screws. Ensure bracket
is centered over the rear cam hole and flush to the
underside of the work surface.
Secure work surface to bracket using two (2) 1/2”
tapping screws.
13.
ITEM
Qty.
Hardware
2
2
1
SCREW-TAPPING,
TR HD. SERR.
10-10 x .550
4
SCREW-TAPPING,
HEX WASHER HEAD,
.312-18 x 1.250
BRACKET- PLASTIC,
BLACK
SCREW-TAPPING,
PAN HEAD,
8-15 x .625
5/8”
TAPPING
SCREWS
11
9
10
12
WORK
SURFACE
BRACKET
