Page 14 of 14
939500540 Rev F
Clamp a wood block on
other side of panel to
prevent excessive
blowout.
Use a sharp 3/8" drill bit
to drill holes through.
WOOD
BLOCK
MASKING TAPE
5.
Using existing clearance holes in desk frame sides for
drilling locations. Drill (4) 3/8” diameter holes through side
of desk frame assembly and into cabinet.
NOTE:
Use masking tape to prevent any possible chipping
while drilling and backup with clamped wood block.
6.
Secure desk frame assembly to base cabinet using four
(4) 1-1/2” connector bolts. Repeat steps 6 & 7 for the other
side of the desk frame assembly.
5
7.
Reinstall drawers in the base cabinet in their original
positions.
6
1-1/2"
CONNECTOR
BOLT