Installation Instructions
9.0
8
CAUTION
Any connection must always be secured with all the delivered screws.
Only use the screws provided with the device.
Installation Plan
9.3
Set up an installation plan before beginning the installation. This plan should take into account:
▪
where the
All-Round Lite Joystick
will be placed;
▪
how the
All-Round Lite Joystick
will be operated (i.e. by hand, chin or attendant._; and,
▪
All-Round Lite Joystick
parameter settings.
Joystick Installation
9.4
The
All-Round Lite Joystick
can be installed to previously ordered mounting hardware simply and
easily. Installation is only a matter of connecting the cabling to the wheelchair electronics.
When installing the joystick, place the joystick in the desired location and secure all wires and cabling,
ensuring that no cables or wires will obstruct the joystick during use. If necessary, before connecting
the joystick to the wheelchair electronics, first attach a power on/off switch and/or a mode (in) switch.
If the
All-Round Lite Joystick
is not mounted in a position in which the USB connector is pointing
toward the user, the joystick direction can be adjusted in increments of 90° with the mo-Vis
Configurator Software.
▪
The software must be installed on a PC and ready to use.
▪
With Dealer-level access, several parameter settings can be changed, such as the mounting position.
Dealer-level access requires a password, which can be easily obtained by contacting Stealth
Products, LLC.
CAUTION
Only install this product to wheelchairs onto which the
chair manufacturer allows the installation of third-party accessories.
CAUTION
Before inserting a connector, remove the input's protective cover.
Do not discard the protective cover.
WARNING
Ensure all cabling is mounted in such a way to avoid rubbing against other
equipment, causing unnecessary and excessive wear and tear.
