Q-Logic™ Setup
10.0
14
1.
Plug in the Q-Logic Handheld Programmer (Previous Page) to the Q-Logic ED (Enhanced
Display) or the standalone joystick if SCIM (Specialty Control Input Module shown below) is in
use.
2.
On the Q-Logic Programmer, navigate to
Program Adjustments
Enhanced Display (or SCIM)
Proportional Input.
Here you can fine tune joystick performance and functionalities, such
as:
▪
Center and Axis Deadband
▪
Tremor Suppression
▪
Assign Direction
▪
Joystick Calibration and Throw
The Center Deadband parameter defines how far the joystick must be moved from neutral position
to engage moving the power chair. The value corresponds to the diameter of a circle around the
joystick center position. No drive or menu instruction will be executed unless the joystick is moved
out of this circle.
1.
Select
m: Center Deadband
option with the navigation's
Up & Down
buttons, then press
the
Right
button.
2.
Use the
Plus & Minus
buttons to adjust the
Center Deadband
. Adjustment ranges from 5
to 50%. Press
Left
navigation button
to save.
Q-Logic Proportional Joystick Setup
10.2
Center Deadband
10.3
