Q-Logic™ Setup
10.0
16
Joystick Calibration
10.6
Joystick Throw
10.7
Calibrating your joystick will set the range of motion for the axes or re-center it to improve
operation.
1.
Follow
Steps 1 & 2
from
Section 10.2
2.
Select
Calibrate
option with the navigation's
Up & Down
buttons, then press the Right
button.
3.
Programmer will prompt for a calibration of the joystick. Follow directions and spin the
joystick twice.
4.
Calibration will be complete. Press
OK
to save. Exit the screen and power cycle the chair.
The Throw is the position where the joystick is stopped in a particular direction. Throw distance is
the maximum distance/angle the shaft can be moved in a particular direction. The throw should be
set to the maximum distance/force the individual utilizing it is capable of.
1.
Once the power cycle from Section 10.8 is complete, follow
Steps 1 & 2
from
Section 10.2
.
2.
Select
Throw
option with navigation's
Up & Down
buttons, then press the
Right
button.
3.
Press the joystick shaft with a force comparable to the user's maximum input force. Adjust the
parameter by pressing the
Plus or Minus
buttons.
4.
When the adjustment is complete, you will be prompted to save the new configuration. Press
Yes
to save.
CAUTION
Calibration MUST be performed for the joystick. This is a new safety feature
update included in Q-Logic Programmers.
