8
14
May 2021, SmartScanNG² User's Guide for Wayside Enclosure Components, EUD-2018086-00 Rev.3
In operation, batteries generate and release flammable hydrogen gas, which, if ignited by a
burning cigarette, naked flame, or spark, may cause battery explosion with a dispersion of
casing fragments and corrosive liquid electrolyte. So, carefully follow the manufacturer's
instructions. Keep all sources of gas ignition away from the batteries and do not allow metallic
articles to contact the negative and positive terminals of a battery at the same time.
Do not install any tower, pole, mast, or antenna on a wet or windy day. Do not install them
near any type of power line. Be sure all parts of the system are out of falling range of any
overhead wires, including the lead to any building. Once installed, do not climb any tower,
pole, or mast. Failure to follow these instructions could result in injury or death.
1.4 Disclaimers
The correct use of this guide, the environmental conditions at the time of installation, the
method of installation itself, and the installation of customer-supplied components are beyond
the control of STC. So too are the correct use and maintenance of all or part of the
SmartScan system. Therefore, the installer, user, and maintainer must assume the risk of any
injury that might occur during installation, use, and maintenance of all or part of the SmartScan
system. STC assumes no risk, liability, or responsibility for errors and omissions on the part of
the installer, user, or maintainer.
1.5 How to Comment on This Guide
We want to hear from you. Tell us what you like or don't like about this guide. Send your
comments to:
Southern Technologies Corporation
Technical Publications Department
6145 Preservation Drive
Chattanooga, Tennessee 37416-3638
USA
All comments become the sole property of STC, and none will be returned.
1.6 How to Order More Copies of This Guide
When placing an order for more copies of this guide, refer to the order number shown on the
cover of this guide. To request pricing and delivery, call 423-892-3029, fax 423-499-0045, or
send an email to [email protected]. Electronic copies of this guide are also
available.
Summary of Contents for Smartscan NG2
