110
14
May 2021, SmartScanNG² User's Guide for Wayside Enclosure Components, EUD-2018086-00 Rev.3
5
When "Auto-Calibration Disengaged" is displayed on your computer, remove the
calibrated heat source.
6
Take the calibrated heat source to the wheel scanner on the south or west rail.
7
With the power cord to the rear of the scanner, place the calibrated heat source on the
wheel scanner.
Scanner
Type III
Cable
Heat Source
8
Repeat steps
3
through
5
.
9
To return to the Main menu, type
X
.
10
To exit the serial interface and return the system to normal operation, type
X
.
11
Replace the black filter frame with the red one in both wheel scanners.
Before continuing, be sure that for each wheel scanner that the red filter frame is
securely in place, that the hole on top of the wheel scanner cover is facing the center of
the track, and that the four socket-head-cap screws on the weather cover are
completely tight.
12
If this is a double-track site, repeat steps
1
through
11
for the second track.
Summary of Contents for Smartscan NG2
