STC Smartscan NG2, Manual

Page: 103 / 133

EUD-2018086-00 Rev.3, SmartScanNG² User's Guide for Wayside Enclosure Components, 14 May 2021
103
f Select Auto-Calibration to open the shutters.
The protective shutters in all scanners should open and stay open for three
minutes. If it isn't enough time to check the shutters and optics, select the option
again.
System Functions Menu
----------------------------------------
[A] - Radio Test
[B] - Vocabulary Test
[C] - Radio Inhibit
[D] - Start Manual Train
[E] - 1KHz Test Tone
[F] - Auto-Calibration
[G] - Remote System RESET
[H] - Delete All Stored Train Data
[I] - Clear Event Log
[J] - Get DHCP address
[K] - Update Menu
[M] - View maintenance statistics
[N] - Reset System Health
[O] - Maintenance email list
[R] - Volume up (3)
[S] - Volume down (3)
[T] - Web security settings
[X] – Exit
g In each scanner, check if its shutter opened.
2 If any shutter didn't open, fix this problem before proceeding.
3 In each scanner, inspect optics and clean if necessary.
4 If the date and time displayed on the top of the System Functions menu are incorrect,
fix them before proceeding.
5 To return to the Main menu, type X .
6 To exit the serial interface and return the system to normal operation, type X .
7 If this is a double-track site, repeat steps 1 through 7 for the other SmartScanNG²
system.