Install Side and Roof Panels
!
Place all side and roof panels on a level surface.
Make sure the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Remove protective plastic from both sides of panels Y9 and Y10.
Place side to face toward the sun facing out when installing.
Slide panels carefully into V-channels in corner profiles L02A
and L02B and side profiles L03A and L03B. As you
continue sliding the panels make sure they fit
into the V-channels in base profiles L01C.
Remove protective plastic from both sides
of panels Y21, Y22 and Y23. Place side to face
toward the sun facing out when installing.
Slide panels carefully into V-channels in
gable profiles L03M, L03N, L03O, L03P and
L03Q and into V-channels of front and back
profiles L02I, L02J, L02K and L02L. As you
continue sliding the panels make sure they
fit into the V-channels in center roof profiles L02G.
4
QTY
2
QTY
Panel
Panel
QTY
Panel
4
2
#Y10
#Y21
4
#Y9
#Y22
#Y23
12.2
12.1
49 of 55
www.stcny.com
Remove protective plastic from EACH side of poly carbonate
panels before installing. Dispose of plastic properly. Install with
side labeled “Face this side towards the sun” FACING OUT.
!
Y9
Y9
Y10
Y10
Y9
Y9
Y10
Y10
IMPORTANT: Place rectangular cutout in corner of each
panel Y21 so they meet at top front and top back corners.
You will install two left and two right Y21panels.
Y21
Y21
Y22
Y21
Y21
Y22
Y23
Y23
Y21