manualshive.com logo in svg

STC Easy2Build Easy-Grow, Assembly Instructions Manual, Page: 38 / 60

Share
Download
STC Easy2Build Easy-Grow Assembly Instructions Manual Download Page 38

Lift front from inside and rest it next to sides. Line up connector S10 with profile L07A, connector S09 

with profile L07B and connectors S04 and S05 with profiles L01C.

7.2A

7.2B

Carefully pull the front until all connectors are half way inside each profile. Make sure connector 

S37 attached to shelf profiles rest on top of profile L04A.  Push front into sides until connectors 

click into place. 

L07B

S09

L04A

S37

L01C

S04

36 of 55 

www.stcny.com

Connectors S09 and S10 CLICK into place.

Connectors S04 and S05 CLICK into place.

There is only one way to properly fasten connectors into profiles. Line up parts 

first to ensure correct placement. Slide connectors until they CLICK securely into 

profile. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.

!

L14A

L07A

L07B

L14B

L01C

S05

S04

S09

S10

L07A

S10

L01C

S04

S37

S37

L07B

S09

S05

L14B

L14A

Summary of Contents for Easy2Build Easy-Grow





























































Reviews:

No comments