Insert long side of cable connector S06 at an angle
into profile channel L02B with HOOK FACING
UP. Slide connector to other side of
channel. Use hex key to securely
tighten and hold in place.
Attach one side of short cable S16 to hook on S06
and lace under profile L04F. Attach other side of cable to a second
S06 cable connector and with hook facing center, insert into profile channel
L01I. Push the S06 connector towards center until profile corners are square and cable is tight. Use
hex key to securely tighten and hold in place.
Repeat step 1.13 inserting cable connectors S06 into
profiles L02A and L01J. Cable rests next to panel
Y1, under profile L04F. Slide connector until
profile corners are square and cable is tight.
Use hex key to securely tighten second
connector and hold in place.
1.13A
1.13B
1.14
14 of 55
www.stcny.com
NOTE: ALL VIEWS ARE FROM INSIDE.
IMPORTANT: Make sure all corners
are squared at 90 degrees.
IMPORTANT: Make sure all corners
are squared at 90 degrees.
L01I
L03C
L01I
L01J
L01J
L03D
L01I
L01J
L02B
L02A
L04F
L04F
Y1
Y16
Y16
Y1
Y1
Y16
Y16
Y1
L02B
L01J
L01I
L02A
L04F
L04F
2
#S16
#S06
QTY
QTY
4
Cable Connector
Cable
QTY
1
Hex Key