manualshive.com logo in svg

STC Easy2Build Easy-Grow, Assembly Instructions Manual, Page: 36 / 60

Share
Download
STC Easy2Build Easy-Grow Assembly Instructions Manual Download Page 36

Set up the other side facing inside with profile L07A next to 

back. Slide shelf profile L14A into connector S03 until it 

clicks into place. Slide shelf profile L14C into connector 

S39 until it clicks into place.

Carefully slide right side into back, lining connectors up with profiles. Move side so connectors S10 

and S05 are half way into profiles L07A and L01C. Connectors S37 rest on top of profile L04F. Push 

side in until connectors click into place.

L14C

L14A

L07A

S03

S39

Secure connectors S37 to 

profile L04F with S02 screws.

L04F

6.2A

6.2B

S10

L07A

S05

L01C

L04F

S37

S37

34 of 55 

www.stcny.com

Connector S10 CLICKS into place.

Connector S05 CLICKS into place.

Connectors S03 and S39 CLICK into place.

There is only one way to properly fasten connectors into profiles. Line up parts 

first to ensure correct placement. Slide connectors until they CLICK securely into 

profile. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.

!

VIEWS FROM INSIDE.

S02

S02

S10

S05

L07A

L01C

L14A

L14C

L04F

L14A

L14C

S03

S39

QTY

2

#S02

Screw

Summary of Contents for Easy2Build Easy-Grow





























































Reviews:

No comments