70 of 86
11.4 Configuration of the receiver
This chapter explains the configuration of a receiver via the setup program.
Prerequisite being that the receiver and the PC are connected via an interface.
11.4.1 Establishing the communication
A differentiation is made between two different way of proceeding when
establishing the communication between receiver and setup program:
Establishing the communication using the "Assistant for device settings". This is
the case when the setup program is used for the first time (device list empty).
Establishing the communication without using the "Assistant for device settings".
This is the case when receiver/transmitter and setup program have already
communicated (list of devices with entries).
When using the USB/TTL converter via a USB interface.
How to proceed:
Step Activity
1
Start the setup program.
2
Select the "Establish connection" function in the "Data transfer" menu.
Once the setup program is started, the "Assistant for the device
settings" appears.
3
Select the receiver under the "Device version" and confirm by pressing
"Continue".
4
Select the PC communication interface "USB-TTL converter" and
confirm with "Continue".
5
Select the connected converter (e.g. USB <-> Serial (LID:...)) and
confirm with "Continue".
6
Select the device address (e.g. 1) and confirm with "Continue".
7
Exit the assistant by pressing "Finish". The device list with the selected
receiver appears.
8
Click on the "Connect" button. The device list is closed, the assistant
terminated and the communication between receiver and setup
program established.
Summary of Contents for WRX900 Series
