40 of 86
8.1.2 Manual assignment of a transmitter ID to a channel
This way of proceeding is selected when the receiver is to be prepared prior to
putting the transmitters into operation. The transmitter ID (max. 5 digits) can be
manually entered for a receiver channel. The function keys of the receiver can be
used to assign the individual transmitter to a receiver channel. This guarantees
unambiguous assignment of a transmitter (the measured value) to the selected
receiving channel.
Link the transmitters as follows:
How to proceed:
Step Action
1
Change over from the standard display to the commissioning/start-up
level (In) by pressing the key > 2 s. The display changes over to the
commissioning/start-up level.
2
Select the channel of the receiver to be linked using the or
keys (in figure 25, channel 2). 0 appears on the right in the bottom line
of the display.
3
Initiate editing by pressing the key. The bottom segments of the
RH digit 0 are flashing.
4
Edit digits using keys or .
Summary of Contents for WRX900 Series
