- 5 -
1.4 Regulatory
Compliance
AV300, AV350, AV450
CNC Vision Metrology Systems comply with Council
Directives 2006/42/EC - Machinery. When installed and operated in accordance with
this manual, they are allowed to carry the CE mark. Testing and evaluations were
conducted on a sample representing the maximum configuration. The Product Safety, EMC
Testing and Evaluations were provided by Garwood Laboratories, San Clemente, CA 92672,
USA. The systems also comply with 2002/95/EC RoHS.
EMC Standards
EN 55011 Class A
Conducted Electromagnetic Emissions
EN 55011 Class A
Radiated Electromagnetic Emissions
EN 61000-4-2
Electrostatic Discharge (Contact)
EN 61000-4-2
Electrostatic Discharge (Air)
EN 61000-4-4
Electrical Fast Transients (Direct Coupled)
EN 61000-4-4
Electrical Fast Transients (Capacitive Coupled)
EN 61000-4-6
Radio Frequency Conducted Immunity (150khz-80Mhz)
EN 61000-4-5
Surge (for control computer, et al)
EN 61000-4-11
Voltage Dips, Short Interrupts and Voltage Variations Immunity
Safety Standards
EN 292-1
Safety of Machinery, General Principles for Design (Referenced)
EN 60204
Safety of Machinery, Electrical Equipment of Machines
EN 12100
Safety of Machinery, Principles for Risk Assessment
EN 60825
Safety of Laser Products
1.5 Disclaimer of Liabilities
The L.S. Starrett Company shall have no liability or responsibility to the customer or any other
person or entity with respect to any liability, loss or damage caused or alleged to be caused
directly or indirectly by this documentation, or the hardware described in it. This includes, but is
not limited to, any interruption of service, loss of business or anticipatory profits, or consequential
damages resulting from the use or operation of hardware or equipment.
1.6 Copyright & Trademark Information
Windows is a registered Trademarks of Microsoft Corporation. M3 is a trademark of MetLogix,
Inc. AV300, AV350 and AV450 are trademarks of the L. S. Starrett Company.
