- 36 -
8.
Taking care not to touch the new bulb with bare hands, place the bulb in the socket.
9.
Firmly push down as shown until the lamp pins are securely seated in the socket. The ejector
lever will move back into the closed position when the bulb is fully seated.
10.
Replace the cover and properly tighten the retaining screws.
11.
Plug the unit in and power the system on to check proper bulb function.
12.
If further assistance is required, please contact your Starrett dealer or the factory.
Eject Bulb
Insert New Bulb
6.8 Periodic Calibration and Maintenance Service
It is recommended that Starrett’s vision metrology systems and multi-sensor vision metrology
systems be serviced and calibrated a minimum of every six (6) months to ensure proper function
and accuracy. Under heavy usage conditions, it may be necessary to service the system more
frequently. Please contact Starrett an authorized Starrett technician for this service.
6.9 Recommended Spare Parts
The only recommended spare part is extra stage glass, in case the original breaks or cracks.
(AV300: PN 4623, AV350: PN 4647, AV450: PN 5485 )
