- 24 -
4.5 Lifting of AV350 / AV450 Metrology Unit
Red carrying hand in front of AV350
Red carrying handle on side of AV350
AV350 and AV450 metrology units include a granite base and are very heavy!
They come with
permanently mounted red carrying handles to facilitate lifting and positioning. Proper materials
handling and lifting procedures of equipment is highly advised and should be incorporated at all
times. To avoid possible injury, professional machinery movers and equipment. Please contact supplier
for further information.
Removing Shipping Retainers
AV systems (and other Starrett metrology systems) use metal lock-down tabs to prevent move-
ment of critical motion components during shipment. These are intended to be removed once
the equipment has been placed in its final position. Look for the lock-down metal tabs and
permanently remove them.
4.6 Wiring of AV350 / AV450 Pedestal
Pulled out PC and “Amp box”
“Amp box” with top cover removed
1.
After the system has been placed on its pedestal, route the cables from the metrology units through
the hole in the pedestal as shown in the photo “Red carrying handle on side of AV350’” on this page.
“Amp box”
PC
M3 controller
Brick power
supplies
