GET matches the target platform (one of i686, x86 64, armhf or
aarch64).
If the installer is run as root the install directory will be
/opt/odos_
imaging/swift_sdk_$TARGET
otherwise it installs under current
users home directory ($HOME) in
$HOME/odos_imaging/swift_
sdk_$TARGET
. Note for backwards compatibility the
_$TARGET
suffix
is removed for the x86 64 $TARGET.
3.4
SwiftUpdater
Figure 3.4: SwiftUpdater
The SwiftUpdater application is a Windows utility for updating the
firmware on a StarForm
TM
Swift-G 3D camera using
.swift
update
files. Details for use are described in chapter 5.
3.4.1
Supported Platforms
The SwiftUpdater application is available for Windows 7 and higher.
3.4.2
Installation
The SwiftUpdater application is a single stand-alone executable
SwiftUpdater.exe
that can be downloaded from
Summary of Contents for Swift-G OI-G1480
Page 19: ...Figure 4 1 Overview of StarStream GUI program 11 of 76...
Page 33: ...Figure 6 2 StarStream GUI Property Browser showing valid Persistent IP configuration 25 of 76...
Page 36: ...Figure 6 3 StarStream GUI Connect and Set Static IP dialogs 28 of 76...
Page 44: ...Figure 7 1 Default Trigger Control Figure 7 2 Example Hardware Trigger Control 36 of 76...