Star Trac E-STe, Work Instructions

Page: 7 / 53

8
620-7925 Rev x1
Step 9.
Identify the four cables coming out of the neck
and the handlebar:
1. Heart rate cable
2. Main I/O cable
3. Coax cable
4. DC power cable
Note: If the unit is not equipped with Personal View-
ing Screen, the coax and DC power cables should
be tucked down the neck as they are part of the PVS
Kit.
Step 11.
Plug-in the 12-pin main I/O cable into the front
display circuit board at J4 connector.
1
2
3
4
Step 10.
Position the display assembly near the top rail
while you make the necessary connections.
Step 12.
Next, plug-in the heart rate cable into the HR
board connector.