Star Trac E-STe, Work Instructions

Page: 6 / 53

7
620-7925 Rev x1
Step 6.
Install the handrails:
1st , slide handrail on to upper display mount.
2nd , with some force lift handrail until opening
at the bottom of the handrail is able to slide over
lower frame.
Repeat for the other handrail.
Step 7.
Thread (2) 1/4-28 x 3/8” Button Head Screws
into the upper handrail. Then tighten each screw
to 110 lb-in (12.4 N-m) of torque. Repeat for the
other handrail.
Step 8.
Thread (2) 1/4-28 x 3/8” Button Head Screws
into the lower handrail. Then tighten each screw
to 110 lb-in (12.4 N-m) of torque. Repeat for the
other handrail.
1
st
2
nd
Step 5.
Thread in (4) M6 x 16 Flat Head Screws in the
front and back of the neck where the two pieces
came together. Tighten the screws to 60 lb-in
(6.7 N-m) of torque.